Front differential gear oil (at vehicles), Checking the oil level, Recommended grade and viscosity – Saab 2006 9-2 User Manual

Page 260

Advertising
background image

11-22

Maintenance and service

Front differential gear oil (AT

vehicles)

¢ Checking the oil level

1) Yellow handle

1. Park the vehicle on a level surface and

stop the engine.

2. Pull out the dipstick, wipe it clean, and

insert it again.

1) Upper level
2) Lower level

3. Pull out the dipstick again and check

the oil level on it. If it is below the lower

level, add oil to bring the level up to the up-

per level.

¢ Recommended grade and

viscosity

Each oil manufacturer has its own base

oils and additives. Never use different

brands together.

Oil grade:

API classification GL-5

SAE viscosity no. and applicable tem-
perature

1

B00472

Be careful not to spill front differen-

tial gear oil when adding it. If oil

touches the exhaust pipe, it may

cause a bad smell, smoke, and/or a

fire. If oil gets on the exhaust pipe,

be sure to wipe it off.

1

2

B00372

-30 -20

-10

0

10

20

30

40

-20

0

60

20

80W

75W/90

80

100

40

85W

90

B00032

A1910BE-A-GSAAB.book Page 22 Tuesday, September 6, 2005 8:37 AM

Advertising