Saab 2006 9-2 - Manual (Page 272)

11-34
Maintenance and service
bel and to have a speed symbol and load
index matching those shown on the tire la-
bel.
Using tires of a non-specified size detracts
from controllability, ride comfort, braking
performance, speedometer accuracy and
odometer accuracy. It also creates incor-
rect body-to-tire clearances and inappro-
priately changes the vehicle’s ground
clearance.
All four tires must be the same in terms of
manufacturer, brand (tread pattern), con-
struction, and size. You are advised to re-
place the tires with new ones that are
identical to those fitted as standard equip-
ment.
For safe vehicle operation, Saab recom-
mends replacing all four tires at the same
time.
NOTE
Unidirectional tires: Some tires have a
specified direction of rotation. A tire of
this type has an arrow or other mark on
its side wall to indicate the direction of
rotation. Install it so that the direction
of rotation is correct when the vehicle
is driven forward.
¢ Wheel replacement
When replacing wheels due, for example,
to damage, make sure the replacement
wheels match the specifications of the
wheels that are fitted as standard equip-
ment. Replacement wheels are available
from Saab dealers.
B00480
— All four tires must be the same in
terms of manufacturer, brand
(tread pattern), construction, de-
gree of wear, speed symbol, load
index and size. Mixing tires of dif-
ferent types, sizes or degrees of
wear can result in damage to vehi-
cle’s power train. Use of different
types or sizes of tires can also
dangerously reduce controllabili-
ty and braking performance and
can lead to an accident.
— Use only radial tires. Do not use
radial tires together with belted
bias tires and/or bias-ply tires. Do-
ing so can dangerously reduce
controllability, resulting in an ac-
cident.
A1910BE-A-GSAAB.book Page 34 Tuesday, September 6, 2005 8:37 AM