Saab 2006 9-2 - Manual (Page 31)

Seat, seatbelt and SRS airbags
1-7
1
– CONTINUED –
q Rear windows side seating position
To raise the head restraint, pull it up.
To lower it, push the head restraint down
while depressing the release button on the
top of the seatback.
The head restraint should be adjusted so
that the center of the head restraint is clos-
est to the top of the occupant’s ears.
When the seats are not occupied, lower
the head restraints to improve rearward
visibility.
q Rear center seating position
To raise the head restraint, pull it up.
To lower it, push the head restraint down
while pressing the release button on the
top of the seatback.
When the rear-center seating position is
occupied, raise the head restraint to the
click position. When the rear center seat-
ing position is not occupied, lower the
head restraint to improve rearward visibil-
ity.
¢ Folding down the rear seat
100098
The head restraint is not intended to
be used at the lowest position. Be-
fore sitting on the seat, raise the
head restraint to the click position.
100099
— After returning the rear seat to its
original position, be certain to
place all of the seatbelts and the
tab attached to the seat cushion
above the seat cushion. And make
certain that the shoulder belts are
fully visible.
— Never allow passengers to ride on
the folded rear seatback or in the
cargo area. Doing so may result in
serious injury or death.
— Secure lengthy items properly to
prevent them from shooting for-
ward and causing serious injury
during a sudden stop.
A1910BE-A-GSAAB.book Page 7 Tuesday, September 6, 2005 8:37 AM