Subaru 2003 Baja - Manual (Page 193)

BAJA U.S.A..A2310BE–A
6
Interior and exterior equipments
6-17
– CONTINUED –
Bed extender (if equipped)
The bed extender is designed to increase the usable cargo area of the
bed.
CAUTION
D When the tailgate and bed extender are in the “open/outward”
position, the license plate bracket must be lowered and locked
into position before the vehicle is driven (see section “License
plate bracket” under the heading of “Tailgate” in Chapter 2 for
more information on the function of the license plate bracket). In
order to avoid damaging the license plate bracket or the bumper,
make certain that the license plate bracket is in its fully lowered/
open position before the tailgate is lowered.
D Do not exceed the cargo load rating of your vehicle. Refer to
“Loading your vehicle” section in Chapter 8.
D Locking buckles must be engaged into the tailgate latch while
the vehicle is in motion.
D When the bed extender is not in use, the tailgate should be
closed.
D Do not use the bed extender or tailgate to secure cargo.
D Remove the bed extender for vehicle “Off Road” use.
D To avoid creating a dangerous road hazard or causing per-
sonal injury, cargo must not stick out beyond the bed extender.
D To avoid damage, the tailgate and bed extender must remain in
the closed/inward position when towing with a trailer hitch.
D To avoid damage, clean the bed extender only with soap, water
and a soft brush.