NISSAN 2012 Sentra User Manual

Page 118

Advertising
background image

WARNING

In an accident you could be thrown from

the vehicle through an open moonroof.
Always

use

seat

belts

and

child

restraints.

Do not allow anyone to stand up or

extend any portion of their body out of
the moonroof opening while the vehicle
is in motion or while the moonroof is
closing.

CAUTION

Remove water drops, snow, ice or sand

from the moonroof before opening.

Do not place heavy objects on the

moonroof or surrounding area.

Resetting the moonroof switch

The moonroof switch may not operate properly
and may need to be reset if any of the following
conditions have occurred:

● the battery terminal has been disconnected,
● the moonroof has been manually moved,
● the moonroof motor has been removed and

reinstalled after the moonroof has been re-
positioned or adjusted,

● the moonroof glass panel has been adjusted

or changed, or

● the electrical supply interrupted and/or

some malfunction has been detected.

Use the following reset procedure to return
moonroof operation to normal.

1. Press the UP/CLOSE side of the moonroof

switch, until it stops and then release the
switch.

2. Push and hold the UP/CLOSE side of the

moonroof switch. The moonroof panel will
begin to move in about 10 seconds.

3. Continue to hold the UP/CLOSE side of the

moonroof switch while the panel moves in a
jogging motion to the full tilt position. When
the panel reaches the full tilt position it will
back up a little and stop.

4. Release the UP/CLOSE side of the moon-

roof switch.

5. Within 5 seconds of completing step 4,

press and continuously hold the UP/CLOSE
side of the moonroof switch. After a delay of
5 seconds, the panel will move from the tilt
position to the open position and back to the
close position.

6. Release the UP/CLOSE side of the moon-

roof switch. Do not disconnect the power for
at least 2 seconds. The moonroof is now
restarted.

NOTE:

If the UP/CLOSE side of the moonroof
switch is released anytime during the re-
starting process, all learned profile data
will be discarded and the procedure will
have to be started over.

If the moonroof still does not operate properly,
have the moonroof system checked, and if nec-
essary repaired, by a NISSAN dealer.

Auto-reverse function (when closing or
tilting down the moonroof)

The auto-reverse function can be activated when
the moonroof is closing or tilts down by automatic
operation when the ignition switch is placed in
the ON position or for about 45 seconds after the
ignition switch is placed in the OFF position.

Depending on the environment or driving
conditions, the auto-reverse function may
be activated if an impact or load similar to
something being caught in the moonroof
occurs.

Instruments and controls

2-39

Advertising