Button -8, Rearview monitor (if so equipped) -8 – NISSAN 2012 Sentra User Manual

Page 161

Advertising
background image

Beep tones:

Select the “Beep Tones” key to toggle the beep
tones feature on or off. When activated, a beep
sound will be heard when a pop-up message
appears on the screen or a button on the unit
(such as the

button) is pressed and held

for two seconds.

Reset all settings/memory:

Select the “Reset All Settings/Memory” key to
return all settings to default and to clear the
memory.

Traffic setup

Refer to the separate Navigation System Own-
er’s Manual for information regarding this item.

BUTTON

To

change

the

display

brightness,

press

the

button. Pressing the button again will

change the display to the day or the night display.

If no operation is performed within 5 seconds, the
display will return to the previous display.

Press and hold the

button for more than

two seconds to turn the display off. Press the
button again to turn the display on.

When the shift selector is shifted into the R
(Reverse) position, the monitor display shows a
rearward view from the vehicle.

WARNING

The system is designed as an aid to the

driver in detecting large stationary ob-
jects to help avoid damaging the ve-
hicle. The system will not detect small
objects below the bumper, and may not
detect objects close to the bumper or
on the ground.

The RearView Monitor is a convenience

but it is not a substitute for proper back-
ing. Always turn and check that it is safe
to do so before backing up. Always
back up slowly.

Objects viewed in the RearView Moni-

tor differ from actual distance because
a wide-angle lens is used.

Make sure that the trunk is securely

closed when backing up.

Underneath the bumper and the corner

areas of the bumper cannot be viewed
on the RearView Monitor because of its
monitoring range limitation.

Do not put anything on the rearview

camera. The rearview camera is in-
stalled beside the license plate light.

When washing the vehicle with high-

pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing wa-
ter condensation on the lens, a mal-
function, fire or an electric shock.

Do not strike the camera. It is a preci-

sion instrument. Otherwise, it may mal-
function or cause damage resulting in a
fire or an electric shock.

CAUTION

There is a plastic cover over the camera.
Do not scratch the cover when cleaning
dirt or snow from the cover.

REARVIEW MONITOR (if so
equipped)

4-8

Display screen, heater, air conditioner, audio and phone systems

Advertising