Manual transmission -9 – NISSAN 2008 Xterra User Manual

Page 189

Advertising
background image

To remove the key from the ignition switch:

1. Shift the selector lever to the P (Park) posi-

tion with the key in the ON position.

2. Turn the key to the LOCK position.
3. Remove the key from the ignition.

If the selector lever is shifted to the P (Park)

position after the key is turned to the OFF posi-

tion or when the key cannot be turned to the

LOCK position, proceed as follows to remove the

key.

1. Move the shift selector lever into the P (Park)

position.

2. Turn the ignition key slightly toward the ON

position.

3. Turn the key to the LOCK position.
4. Remove the key.

The shift selector lever is designed so it cannot

moved out of P (Park) and into any of the other

gear positions if the ignition key is turned to OFF

position or if the key is removed from the switch.
The shift selector lever can be moved if the

ignition switch is in the ON position and the

foot brake pedal is depressed.

There is an OFF position between the

LOCK and ACC positions. The OFF position

is indicated by a “1” on the key cylinder.

When the ignition is in the OFF position,

the steering wheel is not locked.
In order for the steering wheel to be locked, it

must be turned about 1/8 of a turn clockwise

from the straight up position.
To lock the steering wheel, turn the key to

the LOCK position. Remove the key. To

unlock the steering wheel, insert the key

and turn it gently while rotating the steer-

ing wheel slightly right and left.
If the key will not turn from the LOCK posi-

tion, turn the steering wheel to the left or

right while turning the key to unlock the

key cylinder.

MANUAL TRANSMISSION

The ignition switch includes a device that helps

prevent accidental removal of the key while driv-

ing.
The key can only be removed when the ignition

switch is in the LOCK position.
On manual transmission models, to turn the igni-

tion key to LOCK position from ACC or ON

position, turn the key to OFF, push the key in, then

turn the key to LOCK.
In order for the steering wheel to be locked, it

must be turned about 1/8 of a turn clockwise

from the straight up position.

WSD0052

Starting and driving

5-9

REVIEW COPY—

2008 Xterra (xtr)

Owners Manual—USA_English (nna)
06/26/07—debbie

Advertising