Changing engine oil -9 – NISSAN 2008 Xterra User Manual

Page 247

Advertising
background image

CAUTION

Oil level should be checked regularly. Op-

erating the engine with an insufficient

amount of oil can damage the engine, and

such damage is not covered by warranty.

CHANGING ENGINE OIL

1. Park the vehicle on a level surface and apply

the parking brake.

2. Start the engine and let it idle until it reaches

operating temperature, then turn it off.

3. Remove the oil filler cap

A

by turning it

counterclockwise.

4. Place a large drain pan under the drain plug

B

.

5. Remove the drain plug

B

with a wrench by

turning it counterclockwise and completely

drain the oil.

If the oil filter is to be changed, remove and

replace it at this time. See “Changing engine

oil filter” later in this section.

WARNING

Prolonged and repeated contact with

used engine oil may cause skin cancer.

Try to avoid direct skin contact with

used oil. If skin contact is made, wash

thoroughly with soap or hand cleaner

as soon as possible.

Keep used engine oil out of reach of

children.

CAUTION

Be careful not to burn yourself. The engine

oil may be hot.

Waste oil must be disposed of prop-

erly.

Check your local regulations.
6. Clean and reinstall the drain plug and a new

washer. Securely tighten the drain plug with

a wrench. Do not use excessive force.
Drain plug tightening torque:

22 - 29 ft-lb (29 - 39 N·m)

WDI0500

Maintenance and do-it-yourself

8-9

REVIEW COPY—

2008 Xterra (xtr)

Owners Manual—USA_English (nna)
06/26/07—debbie

Advertising