Installing front license plate -11 – NISSAN 2008 Xterra User Manual
Page 289
TIRE AND LOADING INFORMATION
LABEL
The cold tire pressure is shown on the Tire and
Loading Information label. The label is located as
shown.
AIR CONDITIONER SPECIFICATION
LABEL
The air conditioner specification label is affixed to
the underside of the hood as shown.
Use the following steps to mount the front license
plate:
1. Make holes on the plastic finisher at the
location mark (small dimple) using a 0.37 in
(9.5 mm) drill. Apply light pressure to the
drill. Insert two plastic grommets provided.
Install the license plate holder using the two
bolts (and washers) provided.
2. Mount the license plate using two M6-
14mm bolts.
License plate bolt tightening torque:
3.8 - 4.7 ft-lb (5.10 - 6.37 N·m)
WTI0100
WTI0167
LTI0137
INSTALLING FRONT LICENSE PLATE
Technical and consumer information
9-11
੬
REVIEW COPY—
2008 Xterra (xtr)
Owners Manual—USA_English (nna)
06/26/07—debbie
੭