Phone, Bluetooth, Phone -18 – Saturn 2010 VUE User Manual

Page 184: Bluetooth -18

Advertising
background image

7-18

Infotainment System

Phone

Bluetooth

Vehicles with a Bluetooth system
can use a Bluetooth capable cell
phone with a Hands Free Profile to
make and receive phone calls. The
system can be used while the key is
in ON/RUN or ACC/ACCESSORY
position. The range of the Bluetooth
system can be up to 9.1 m (30 ft.).
Not all phones support all functions,
and not all phones are guaranteed
to work with the in-vehicle Bluetooth
system. See www.gm.com/bluetooth
for more information on compatible
phones.

Voice Recognition

The Bluetooth system uses voice
recognition to interpret voice
commands to dial phone numbers
and name tags.

Noise: Keep interior noise levels to
a minimum. The system may not
recognize voice commands if there
is too much background noise.

When to Speak: A short tone
sounds after the system responds
indicating when it is waiting for a
voice command. Wait until the tone
and then speak.

How to Speak: Speak clearly in a
calm and natural voice.

Audio System

When using the in‐vehicle Bluetooth
system, sound comes through the
vehicle's front audio system
speakers and overrides the audio
system. Use the audio system
volume knob, during a call, to
change the volume level. The
adjusted volume level remains in
memory for later calls. To prevent
missed calls, a minimum volume
level is used if the volume is turned
down too low.

Bluetooth Controls

Use the buttons located on the
steering wheel to operate the
in‐vehicle Bluetooth system. See
Steering Wheel Controls on
page 5‑3
for more information.

J

/

0

(Push To Talk) : Press to

answer incoming calls, confirm
system information, and to start
speech recognition.

− /

K

(Phone On Hook): Press to

end a call and to cancel an
operation.

Pairing

A Bluetooth enabled cell phone
must be paired to the in‐vehicle
Bluetooth system first and then
connected to the vehicle before it
can be used. See the cell phone
manufacturers user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made
using OnStar

®

Hands‐Free Calling,

if available. Refer to the OnStar
owner's guide for more information.

Advertising