Saturn 2010 VUE - Manual (Page 296)

10-30 Vehicle Care
2. Push the release lever (B) to
disengage the hook and push
the wiper arm (A) out of the
blade (C).
3. Push the new wiper blade
securely on the wiper arm until
you hear the release lever click
into place.
4. Return the wiper arm and blade
assembly to the rest position on
the windshield.
To replace the rear wiper blade:
1. Lift the rear wiper arm (A) from
the window.
2. Turn the bottom edge of the
blade assembly (B) slightly away
from the underside of the
wiper arm.
3. Apply downward pressure to the
blade assembly and remove
from the wiper arm.
4. Install the new wiper blade.
5. Return the wiper arm and blade
assembly to the rest position on
the window.
Headlamp Aiming
The headlamp aiming system has
been preset at the factory.
If the vehicle is damaged in an
accident, the aim of the headlamps
may be affected and adjustment
may be necessary.
It is recommended that a dealer/
retailer adjust the headlamps.
To re-aim the headlamps yourself,
use the following procedure.
The vehicle should be properly
prepared as follows:
. The vehicle should be placed so
the headlamps are 7.6 m (25 ft)
from a light colored wall.
. The vehicle must have all
four tires on a level surface
which is level all the way to
the wall.