Dual XDVD710 - Manual (Page 10)

9
XDVD710 OPERATION
15 7
1 2 4 5
Band
Auto Store/Preset Scan
Secondary LCD
Display
Open/Close Monitor
Eject
Rotary Encoder/Enter
Mode 1
2
3
4
5
6
7
8 Play/Pause/Scan
Stop
Chapter/Track Up
Chapter/Track Down
Fast Forward
Fast Reverse
Mute
Power/Volume 9
10
11
12
13
14
15
14 13 12 11 10 9 8 16
This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will
not obstruct the dash, shifter or any other controls.
Upon installation, do not attempt to move the monitor up/down by hand. Use the
ANGLE / and OPEN
buttons on the front panel only.
The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the
obstacle and press OPEN again to resume the monitor open/close sequence.
•
•
•
Monitor Notes:
Control Locations - Monitor Closed
3
16
6