Dual XDVD710 - Manual (Page 19)

XDVD710 OPERATION
18
Press BAND to increment from FM1, FM, FM3, AM1] FM1.
Press AS/PS momentarily to start station PRESET SCAN function. The unit
will now scan your program presets for 10 seconds for each preset in that
band. Press AS/PS again to stop scanning. Press AS/PS for  seconds to
start AUTO STORE station preset function in current BAND.
Press the DISP button to display various information on the secondary LCD
screen when the monitor is closed.
Press OPEN to open or close the monitor. The unit will emit 1 confirmation
beep upon opening, 3 beeps when closing. Be careful not to not touch
or obstruct the monitor movement during the open/close sequence, or
permanent damage could occur.
Press once for DISC ejection.
Press to access MAIN menu, rotate clockwise/counter-clockwise to select
desired item and press once to ENTER.
Press once to incrementally select desired source.
Selects the next chapter/track for playback.
Selects the previous chapter/track for playback.
Stop playback of DVD/CD/MP3/iPod.
Press once for PAUSE, press again for PLAY.
Fast forward the disc content.
Fast reverse the disc content.
Press once to MUTE audio, press again to return audio, an icon indicator will
flash on the TFT monitor.
Press POWER momentarily to turn the unit on, the unit will beep  times.
Press and hold POWER for more than  seconds, unit will beep 1 time, then
turn off. Note: EJECT will still function even if POWER is off.
Rotate VOLUME rotary knob Q or P for desired VOLUME level, press once to
access the AUDIO SETUP MENU.
Turn VOLUME rotary to desired listening level, press and hold VOLUME
rotary knob for 3 seconds to program currently selected volume level.
BAND
AS/PS
(Auto Store /Preset Scan)
DISP
OPEN
EJECT
ROTARY
MODE
TRACK UP
TRACK DOWN
STOP
PLAY/PAUSE
FAST FORWARD
FAST REVERSE
MUTE
POWER ON/OFF
VOLUME
PROGRAMMABLE TURN-ON
VOLUME
General Operation