Troubleshooting, Xdvd710 operation, Xm radio – Dual XDVD710 User Manual

Page 57

Advertising
background image

XDVD710

OPERATION

56

Problem

Cause

Action

Unit will not turn on

(no power)

Yellow wire not connected or incorrect voltage
Red wire not connected or incorrect voltage

Check connections for proper voltage (11~16VDC)

Black wire not connected

Check connection to ground

Fuse blown

Replace fuse

Unit has power

(but no sound)

Speaker wires not connected

Check connections at speakers

One or more speaker wires touching each
other or touching chassis ground

Insulate all bare speaker wires from each other and chassis
ground

Unit blows fuse

Yellow or red wire touching chassis ground

Check for pinched wire

Speaker wires touching chassis ground

Check for pinched wire

Incorrect fuse rating

Use fuse with correct rating

Unit has audio

(but no video)

Parking brake safety circuit not connected
Parking brake not applied

Check connections at parking brake
Apply parking brake

No video display

(when in reverse)

Reverse circuit not connected
Vehicle is not in reverse

Check connections at reverse lamp
Select reverse gear

DVD does not start playback Physical defect in media

Wrong region

Check media for scratches
Use discs labeled "Region 1" or "All" only.

IR remote does not work

Dead battery

Replace battery

Excessive skipping

Unit is not mounted correctly

Check mounting sleeve

Physical defect in media

Check media for scratches

Bad Disc appears

on display

Focus error or disc is in upside down

Press eject or RESET

Incorrect Region Code

appears on display

Region code error

Use only DVDs labeled “Region 1” or “All” only.

Front panel will not

open/close

Front panel obstructed

Remove the obstacle and press OPEN again to resume the
monitor open/close sequence.

XM Radio

Problem

Cause

Action

You can not receive any

XM channels

Your XM Radio receiver is not activated

Contact XM as described on page 53

You can not tune into a

specific XM channel

You may not be authorized to receive that
channel

Verify your subscription with XM
Contact XM as described on page 53

No Signal appears on

display

The XM signal is blocked

Move vehicle from obstructed area
(such as inside a tunnel or a garage)

This message may appear when driving
inside a tunnel or under obstacles

Make sure the antenna has a clear view of the sky

Check Antenna appears on

display

The XM antenna is not connected
The antenna cable is damaged

Check XM antenna connection
Check for pinched or cut antenna cable

OFF AIR appears on

display

The selected channel is not in service

Try another channel

No song title or artist name

is displayed

This information may not be available for
some music channels, news channels, or
when there is no song playing

This condition is normal, there is
nothing wrong with your receiver

Troubleshooting

Advertising