Dual XDVD710 - Manual (Page 55)

XDVD710 OPERATION
54
Tuning Modes
Channel Selection
Storing and Recalling Preset
Channels
Direct Channel Selection
Channel Search by Category
Quick Select of Category
Touch to select between XM, XM1. XM and XM3 bands.
Touch momentarily to select the next available channel.
Up to 48 XM channels can be stored. To store a channel, select XM1, XM or
XM3 band and the desired channel. Press and hold the desired channel name
for more than  seconds. When stored, the channel name will be highlighted
by a box and the channel information will appear on the TFT display. The
preset channel can be recalled anytime by pressing the corresponding
channel name.
Touch to select XM DIRECT channel entry. Enter the desired channel
using the keypad buttons 1-0, then press ok to confirm the selected channel.
If the channel is not available, the current channel will be retained.
Touch once to display the category list.
Touch desired CATEGORY.
Touch momentarily to select the next available channel within
the selected CATEGORY.
To exit CATEGORY mode, touch the button to resume normal XM
CHANNEL selections.
L
L
L
L
XM Radio Operation (Optional)