Dual XDVD710 - Manual (Page 13)

XDVD710 OPERATION
1
White = No disc
Red = Disc inserted
Press ANGLE  to increase the monitor view angle.
Press ANGLE  to decrease the monitor view angle.
Notes:
• Do not attempt to move the monitor up/down by hand - severe damage will
occur. Use the front panel buttons or the remote control only.
• The color of the LCD monitor varies between viewing angles. Select the angle
with the most optimum view for your location.
• The last position of the monitor will be saved in memory. The monitor will
return to its last position automatically the next time it is opened.
Press INFO button for 1 second to display DVD disc information.
Press and hold INFO for  seconds to change TFT LCD BRIGHTNESS:
Press ANGLE  to increase, ANGLE  to decrease or use VOLUME rotary to
adjust the level up or down, (0 minimum/0 maximum), 10 is default.
If you experience abnormal operation or, your unit is inoperable, press the
RESET button for 3 seconds, located on the front bottom-right corner of the unit.
After a system reset, the unit restores all factory default settings.
Note: Use the tip of a pen to access the button.
Disc-in indicator
Monitor Angle 
INFO/PIC
SYSTEM RESET
Control Functions - Monitor Open