Atlona AT UHD PRO3-88M - Manual (Page 7)

7
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Tip (+)
Analog Audio
A captive screw analog audio connector is provided to ensure a more reliable and secure
connection. The captive screw connector supports unbalanced audio output.
Unbalanced audio connections use two wires for connection with consumer audio components.
For an easier and time saving solution for analog audio, the optional Atlona Captive Screw Ready 2
Channel Unbalanced Audio Cable
(AT-LC-CS-2CH-2M) features pre-stripped wires at one end and RCA
connectors at the other end. Purchase these at http://www.atlona.com
To connect these, use the red wire in the right positive port, the white wire in the left positive port,
and the black can be placed in either ground port.
Note: Pin outs may vary, please refer to the audio device’s manual to ensure a correct connection.
Important! When terminating cables, please ensure exposed adjacent wires do not touch. This may result in
a short that can damage connected devices.
RCA
Sleeve ( Ground)
+ +
UNBALANCED
+ +
L / R