Atlona AT PRO3HD44M V3 - Manual (Page 10)

10
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Step 1: copy an EDID
---> ---> ---> --->
AT-PRO3HD44M
Select Input Number Select Function Option
home screen
1 To copy up to 4 EDIDs
2 To choose input EDID
--->
--->
Copy from output #
Save to Memory (1-4) # Copy from output #
Save to Memory (1-4) #
Feedback=
”Saved port # EDID to
Memory # [Failed/Passed]”
---> --->
--->
--->
--->
Before an EDID can be loaded to an input, it must first be copied to the matrix’s memory. Each
display’s EDID can be saved individually to one of the matrix’s four preset EDID memories.
memory selection
output selection
Step 2: load a copied EDID onto an input
---> ---> ---> --->
AT-PRO3HD44M
Select Input Number Select Function Option
home screen
1 To copy up to 4 EDIDs
2 To choose input EDID
Input #
Select an input port Input # Press Enter
Current: Default
Input: # Mode:
1.Default 2.Saved 3.Int Input: # Select saved
EDID memory 1-4 (#)
Use EDID memory # + enter
_ _ _
--->
--->
Feedback = ”Save memory # EDID
to input #”
--->
--->
--->
---> --->
---> ---> ---> --->
--->
Atlona EDID - ATL
Pioneer EDID - PIO
Toshiba EDID - TSB EX.
Once EDIDs have been copied to memory they can be loaded to a specific input.
Note: (refer to the diagram on page 9) Using the EDID of output 3 with input 1 will enable 1080p,
3D, and Dolby TrueHD to pass. Output 2 will receive no audio or video and output 1 will receive no
audio with these settings.
memory selection
input selection