Atlona AT PRO3HD44M V3 - Manual (Page 24)

24
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Remote Control
Output selection. Numbers correspond with the category cable
outputs (1-4) on the matrix.
Input selection. Numbers correspond with the HDMI inputs (1-4)
on the matrix.
Arrow buttons are not functional for this product.
Command for Output (receiver) baud rate
RS232paraX[baudrate,data-length,parity,stop-bit]
X represents the zone# (output#), the data length must be 7 or 8, partity bit will be 0 for none, 1
for odd, 2 for even, and the stop-bit must be 1 or 2.
For example if you wish to change the baud rate to 19200, data length 8, ODD parity, and 1
stop-bit on the receiver in zone 3 to 19200 the command would look like this:
RS232para3[19200,8,1,1]