Edid set up – Atlona AT PRO3HD44M V3 User Manual
Page 9
9
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
To save an I/O route to memory
To load a saved I/O route
Feedback =
”Memory # saved”
Feedback =
”Memory # loaded”
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
--->
AT-PRO3HD44M
Select Input Number
AT-PRO3HD44M
Select Input Number
Select Function Option
Select Function Option
1 Save in/out route
2 Select memory route
1 Save in/out route
2 Select memory route
Save to memory (1-4) #
Press enter
Select Memory route 1-4
Press enter to load
home screen
home screen
memory selection
memory selection
Once inputs and outputs have been set they can be saved to memory and recalled later. Up to 4
individual input/output routes can be saved. The route will remain in memory until a new route has
been saved to that memory number or the matrix has been factory reset.
Once an input/output route has been saved, it can be loaded at any time.
I/O Route Memory
O: 1 2 3 4
I : 4 2 1 3
example route
When the matrix is completely connected and turned on it will load the default EDID, which is the
highest common native resolution of the devices. (i.e. In the diagram below the default would be
720p with 2ch audio. Multi-channel audio and 3D are not enabled on internal mode, unless
all devices have these features.)
EDID Set Up
Output 2
Output 3
Input 2
1080p-Dolby TrueHD (3D)
Input 1
Output 1
720p-2ch
720p-2ch
1080p (3D)-2ch
1080p-Dolby TrueHD (3D)
AT-PRO3HD44M
DC 24V
ZONE 4
ZONE 3
ZONE 2
ZONE 1
HDMI IN
MATRIX OUT
RS-232
LAN
MATRIX IN
IR IN
IR OUT
COAX
OUT
CAT5e/6/7
IR IN
IR OUT
COAX
OUT
CAT5e/6/7
IR IN
IR OUT
COAX
OUT
CAT5e/6/7
IR IN
IR OUT
COAX
OUT
CAT5e/6/7
1
2
3
4
AT-PRO3HD44M
ENTER
POWER
EDID
MEMORY
ALL
DEFAULT
CANCEL
FUNCTION
1
2
3
4
On default, all devices in the diagram will work at 720p. If a device is not syncing or a different
resolution is required, internal EDID or EDID copy and load should resolve these issues. The
PRO3HD can copy up to 4 EDIDs to memory.