Atlona AT PRO2HD V1 - Manual (Page 5)

5
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
CAT5e/6
OUT
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
MODE
LINK
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
CAT5e/6
OUT
AUDIO IN
HDMI IN
MATRIX IR IN
IR IN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
MATRIX IR OUT
FIRMWARE UPDATE
RS-232
MAIN POWER
DC 24V
BACKUP POWER
CAT5e/6
OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
AUDIO IN
HDMI IN
IR IN
IR OUT
1 2 3 4 5 6 7 8
9 10
MAIN
POWER
POWER
CANCEL
ENTER
LOCK ALL DEFAULT SAVE RECALL EDID FUNCTION
BACKUP
POWER
11 12 13 14 15 16
Back Panel
1. Matrix IR IN - Used to control matrix I/O switching from a 3rd party IR control box.
2. Matrix IR Out - Global output, combines IR for all incoming zones.
3. Firmware Update - Type B USB Port used for updating matrix firmware
4. RS-232 - Connect to this port for control from a computer or 3rd party control box.
5. Audio Input Ports - 3.5mm stereo audio port enabled only when a DVI/D adaptor is connected,
disabled when HDMI cable is connected.
6. HDMI Input Ports - Connect HDMI sources into these ports, such as DVD players, BluRay players,
computers, etc.
7. IR 3.5mm mono In ports - Used in conjunction with 3rd IR party control box to extend IR control
commands to video displays over category cable.
Note: Be sure you’re using a mono to mono 3.5mm IR cable (i.e. AT-MINIMONO6) for 3rd
party control boxes, stereo 3.5mm cables are not compatible.
8. IR Out ports - Sends IR signal to sources through a 3.5mm mono IR emitter
9. CAT5e/6/7 (RJ45) Output ports - Extends video and bidirectional RS-232, IR, and audio signals
through a single category cable.
10. Main Power - Use included 24V/6.25A DC adaptor to power the matrix switcher
11. Backup Power - Redundant power supply in case the main power supply fails. Includes a
second 24V/6.25A DC adaptor.
5
1
3
2
6
8
7
9
11 10
4