Atlona AT HD IR40SR User Manual
Page 6
5
Hardware Installation
1. Connect your HDMI / DVI source (such as a DVD player) to the transmit-
ting unit AT-HD-IR40S.
2. Connect the IR transmitting cable to the transmitting unit AT-HD-
IR40S, and make the IR transmitter directly point to the IR of HDMI
source.
3. Connect your HDMI / DVI display (such as an LCD TV or plasma TV) to
the receiving unit AT-HD-IR40R.
4. Connect the IR receiving cable to the receiving unit AT-HD-IR40R,
and make the IR receiver directly point to the user.
5. Connect your CAT-5/5e/6 cables between the transmitting and receiving
units.
6. Make sure your CAT-5/5e/6 cables are tightly connected and not loose.
7. Plug in 5V DC power cord to the power jack of the receiving unit AT-HD-
IR40R.
8. If a flickering or a blinking image is shown on the display, please try
to adjust the rotational EQ control to improve the cable skew. 0 stands
for the strongest EQ while 7 stands for the weakest. Try adjusting the
EQ from 7 to 0.