AXING SKM 1-03 - Manual (Page 12)

Operation Instructions SKM 1-03/-04/-05/-06 and 2-03/-04
Chapterl 3: Programming
12 © AXING AG | Switzerland | Reserving change in design and type - We cannot be held liable for printing errors 2014-09-17
 Analogue Input Signal:
VGA, Composite (FBAS), RGB (synch. impulse at green), Scart RGB (synch. impulse at video),
YPbPr (synch. impulse at green), Scart YPbPr (synch. impulse at video)
When VGA is chosed, one of the following resolutions have to be chosed as output resolution of your
PC or notebook: 640×480@60/72/75/85Hz, 800×600@60/72/75/85Hz, 1024×768@60/72/75/85Hz
oder 1280×1024@60Hz
 TV Standard:
PAL oder NTSC
SKM 2-03 / SKM 2-04:
 Analogue Input Signal 1, right input (see Fig. 2):
Composite (FBAS), S-Video, RGB (synch. impulse at green), Scart RGB (synch. impulse at video),
YPbPr (synch. impulse at green), Scart YPbPr (synch. impulse at video)
 Analogue Input Signal 2, left input (see Fig. 2):
Composite (FBAS), S-Video, RGB (synch. impulse at green), Scart RGB (synch. impulse at video),
YPbPr (synch. impulse at green), Scart YPbPr (synch. impulse at video)
SKM 1-03, SKM 1-04, SKM 1-06, SKM 2-03, SKM 2-04:
 Hor. Resolution
DI (full resolution 720×576)
HD1 (half resolution 360×576)
CIF (quarter resolution 360×288)
 GOP Size
6,12,15,24 or 30
(maximum frames per GOP:
18 (NTSC) / 15 (PAL)
 GOP Structure
I (each GOP consist only of I-frames),
IP (the encoder uses one I-frame and then only P-frames inside a GOP),
IBP (the encoder uses an I-frame at the beginning of the GOP and encodes the rest in B- and P-
frames) or
IBBP (the encoder uses an I-frame at the beginning of each GOP and encodes the rest in B- and P-
frames)
 Const. Bitrate
4 Mbit/s, 6 Mbit/s, or 8 Mbit/s
 Audio Sample Freq
32,0 kHz, 44,1 kHz or 48 kHz
 Audio Bitrate
64 kbit/s, 128 kbit/s or 256 kbit/s
 Audio
ES Mode Mono, Dual, Stereo
Note
Fig. 17: Encoder Configuration
menu SKM 2-03 and SKM 2-04
two input signal