Boogie Board Sync 9.7 eWriter - Manual (Page 13)

13 BOOGIE BOARD SYNC 9.7 EWRITER USER MANUAL
DIGITIZER MODE
To operate the Boogie Board Sync eWriter in “digitizer mode” - which allows you to use your Sync Stylus to control
your cursor as a mouse or input device - first download the Sync Virtual Desktop Companion (VDC) software from our
website: http://improvelectronics.com/support/downloads/
After installing the Sync VDC, select the Sync icon that appears in your computer’s menu bar and select “Digitizer Mode”
to switch from the default “VDC mode.” Move the Sync Stylus close to, but NOT IN CONTACT with (i.e., hovering over)
the Boogie Board Sync eWriter drawing surface.
To select a button or feature on your computer, touch the stylus to the Boogie Board Sync eWriter drawing surface
to create the equivalent of a mouse “left click.” A “right click” is produced instead of a “left click” by holding in the button
on the Sync Stylus when touching the Sync Stylus to the drawing surface.
CARE AND MAINTENANCE
Store your Boogie Board Sync eWriter in an upright or flat position (just ensure there is nothing else lying on top of the
surface.) Always store your Boogie Board Sync eWriter with the Sync Stylus docked.
Treat your Boogie Board Sync eWriter like any electronic device. Do not store or use it extreme temperatures or
humidity. See the Technical Specifications on page 7 for additional information.