Setting up – Boogie Board Sync 9.7 eWriter User Manual

Page 9

Advertising
background image

9

BOOGIE BOARD SYNC 9.7 EWRITER USER MANUAL

SETTING UP

Charging

IMPORTANT:

Charge your Boogie Board Sync eWriter for four hours before first use. A full charge will last approximately
one week under normal use.

1. Remove the Boogie Board Sync eWriter and micro USB cable.

2. Connect the micro end of the USB cable to the micro USB

port on the bottom of your Boogie Board Sync eWriter.

3. Connect the USB A (larger) end of the micro USB cable into an

available USB port on a properly charged external device (tablet
or computer).

4. When the Boogie Board Sync eWriter is connected and charging,

you will see two lights:

• The charging indicator light next to the micro USB port on the

Boogie Board Sync eWriter will appear

RED

. This light will turn

OFF when the Sync is fully charged.

• The status indicator light next to the erase button on the front

of the Boogie Board Sync eWriter will appear

RED

. This indicates

that the Boogie Board Sync eWriter is not recording onto the
Boogie Board Sync eWriter’s internal memory.

5. Disconnect the micro USB cable from your external device and

Boogie Board Sync eWriter. Your Boogie Board Sync eWriter is now
ready to use.

It is suggested to charge your Boogie Board Sync eWriter when the
Status Indicator light appears yellow or red. See page 16 for an indicator
light chart.

Boogie Board

Sync eWriter

External

Device

Status Indicator

Charging Indicator

Advertising