Brennenstuhl Remote Control Set RCS 2044 N Comfort - Manual (Page 11)

11
Operating Instructions for
the RCS 2044 N Comfort
Wireless Controller Set
SA F E T Y
Intended Use
The devices are designed to function as a wireless controller
set for private use. They are not suitable for commercial
purposes. The wireless controller set is used to switch lamps
and electrical devices off and on. The IP 20 switchable
sockets are only suitable for use in closed rooms. The IP 44
switchable socket (with hinged cover) can be used outdoors.
Devices must be operated individually. Do not connect several
switchable sockets in series. Any other use will be deemed
contrary to the intended use. The manufacturer is not liable
for damage as a result of using the devices for purposes
other than the ones for which they are intended.
Operating Instructions
Make sure you read the entire operating instructions before
using the devices. Do not throw away the operating instruc-
tions. Include these operating instructions if you give the
devices to someone else.
Basic Safety Information
• Children are not aware of the dangers that can result from
the improper use of electrical devices. Do not allow children
to use electrical devices unattended.
• Choking hazard! Do not leave packaging material lying
around. Children can swallow small parts and choke.
• Always plug the switchable sockets into traditional Schuko
sockets with an AC voltage of 220 - 240 V and 50 Hz.
• Do not connect the switchable sockets to an extension cord.
• Always connect the switchable sockets to loads that are
within the listed power limits.
• Do not connect any loads that could cause a fire (e.g., irons)
or other damage if they switch on unattended.
• Do not connect loads that require a motor capacitor (e.g.,
refrigerators).
096812 BA_Funkschaltset RCS 2044 N 24.09.14 13:45 Seite 11