Brennenstuhl Remote Control Set RCS 2044 N Comfort User Manual
Page 16
Advertising
Assign the switchable socket to one of the control keys on
the remote control (A, B, C or D)
1. Use the DIP switches (14) A to D to set a control key on the
remote control:
DIP switch E is unassigned.
Control key
on remote control DIP switch on switchable socket
A
B
C
D
E
A
ON
OFF
OFF
OFF
OFF
B
OFF
ON
OFF
OFF
OFF
C
OFF
OFF
ON
OFF
OFF
D
OFF
OFF
OFF
ON
OFF
2. Swivel the cover (18) to the inside and close.
3. Insert the screw (16) into the thread (15) through the screw
opening (17) and tighten.
Example
Set the system code to 123 on the remote control.
Set all switchable sockets to system code 123. Also assign a
control key. In the drawing, button pair A has been set with
DIP switch A:
16
Operating instructions
RCS 2044 N
096812 BA_Funkschaltset RCS 2044 N 24.09.14 13:45 Seite 16
Advertising