Default screen, Deleting maximum demand, Display backlight – CIRCUTOR CVM-C5 Series User Manual
Page 30
4�6�12� Deleting maximum demand
On this screen you select whether or not to delete the maximum
demand.
Use the
key to jump between the two options (Yes and No).
To validate the information and go to the next programming step,
press
.
4�6�13� Default screen
On this screen the default or start-up instantaneous data screen
) for the
CVM-C5 is selected.
Press the
key repeatedly until you see the default screen of
your choice.
To validate the screen and go to the next programming step,
press
.
The electrical parameters may also be displayed by automatically rotating through the 7
instantaneous data screens in 5-second intervals.
To do so press the
key repeatedly until the parameters flash;
To validate the rotating screen function and go to the next programming step, press
.
4�6�14� Display backlight
On this screen the time that the Backlight will stay lit (in seconds)
after the last keystroke on the unit is programmed.
To enter or modify the backlight value, press the
key
repeatedly, increasing the value of the flashing digit.
When the on-screen value is that desired, press the
key to go to the next digit to modify
the other values.
The value 00 indicates that the backlight will stay permanently lit.
The backlight time may range from 5 to 99 seconds.
To validate the information and go to the next programming step, press
.
30
CVM-C5
Instruction Manual