CIRCUTOR CVM-BD Series - Manual (Page 21)

-- Supply network analyzers CVM-BD-420-4 & CVM-BD-420-8 -- M98132301-20 --- Page Nº 20
- If you select “SET PAGE YES” , you can program the desired parameters in this
page :
xx A1
xx A2
xx A3
Parameter code ( set-up ) / Parameter symbol
SET-UP :
- "max" key : Allows us modifying the value of the blinking digit. Each time it is
pressed the value is increased.
- "min" key : Allows us the validation of the blinking digit and going to the next one.
Each display has two digits to select the desired parameters among the ones in the
attached code chart:
Parameter Symbol
phase L1
Code Symbol
phase L2
Code Symbol
phase L3
Code
Single voltage V 1 01 V 2 07 V 3 13
Current A 1 02 A 2 08 A 3 14
Active power kW 1 03 kW 2 09 kW 3 15
Inductive power kvarL 1 04 kvarL 2 10 kvarL 3 16
Capacitiva power kvarC 1 05 kvarC 2 11 kvarC 3 17
Power factor PF 1 06 PF 2 12 PF 3 18
Three phase single voltage Vav III 19 Frequency Hz 25
Three phase current Aav III 20 Three ph. apparent power kVA III 26
Three phase active power kW III 21 Ph-Ph voltage L1- L2 V 12 27
Three. ph. inductive power. kvarL III 22 Ph-Ph voltage L2 - L3 V 23 28
Three ph. capacitive power kvarC III 23 Ph-Ph voltage L3 - L1 V 31 29
Three ph. power factor. PF III 24 Three ph. Ph-Ph voltage Vc III 30