CIRCUTOR QNA-P Series User Manual
Page 29
Page no.
28
10.-
SAFETY ADVICE.
The installation rules in the previous sections (INSTALLATION
AND START UP, FORMS OF INSTALLATION AND TECHNICAL
FEATURES) have to be borne in mind.
When the equipment is connected, the terminals can be
dangerous when touched. Opening covers or removing objects may access parts
that are dangerous when touched. This equipment has been designed to conform to
the IEC-348 standard and is supplied in proper working order.
11.-
MAINTENANCE.
The QNA-412 does not require special maintenance. Any adjustment,
maintenance or repair to the open equipment is to be avoided. If it cannot be avoided
it must be undertaken by someone qualified and well informed of the necessary
action.
Before any connection, replacement, maintenance or repair the equipment
must be disconnected from any power supply.
When the equipment or its protection is suspected to be faulty, it must be
taken out of service and any accidental connection avoided.
The equipment is designed to be changed quickly in the event of any
breakdown.
12.-
TECHNICAL SERVICE.
In the event of any equipment failure or any operational queries please contact
the technical service of CIRCUTOR S.A.
CIRCUTOR S.A. - After sales service.
Vial Sant Jordi, s/n
08232 - Viladecavalls.
Tel. -
(+34) 93 745 29 00
Fax - (+34) 93 745 29 14
E-mail -