CIRCUTOR REC3 Series - Manual (Page 12)

1
2
N
Figure 5: Installing the REC 3 on a DIN rail�
REC 3 2 poles, REC 3 4 poles and REC 3C 2 poles: The connections between the control
module and the RCCB are made by tightening the screws on the power supply and output ter-
minals. Once the screws have been tightened, remove the cover to verify correct connection.
Press on the fixing windows with a flat head screwdriver to remove the cover from the top of the
connections.( Figure 6 )
N
Figure 6: Press on the windows with a screwdriver to remove the connections cover�
12 Instruction Manual
REC 3 - REC 3C