CIRCUTOR REC3 Series - Manual (Page 17)

5�- OPERATION
The unit has two operating modes, manual and automatic, which can be selected using the
mode selector switch.
5.1.- MANUAL
The REC 3 can operate in manual mode as if it were a standard RCCB.
To operate in this mode, the mode selector switch must be all the way to the right, in OFF
position, to disable the unit's automatic reclosing device. ( Figure 11)
The RCCB must be reclosed manually.
The AUTO and REC LEDs are off.
Figure 11: REC3 in manual mode, with mode selector switch at OFF�
5.2.- AUTOMATIC
To operate in Automatic mode, the mode selector switch must be all the way to the left, in ON
position, to enable the unit's automatic reclosing system.( Figure 12)
The AUTO LED is constantly lit and the REC LED lights up based on the unit's status.
17 Instruction Manual
REC 3 - REC 3C