CIRCUTOR EMK Series - Manual (Page 2)

EMK series
Instructions Manual M98118701-01-12A 2
SYMBOLS AND WARNINGS
Pay attention to the warnings in this manual, which are shown with the following
symbols.
DANGER: Warns of a risk, which could result in personal injury or material
damage.
WARNING: Indicates that special attention should be paid to a specific point.
If you must handle the equipment for its installation, start-up or maintenance, the
following should be taken into consideration:
Incorrect handling or installation of the unit may result in injury to personnel as well
as damage to equipment. In particular, handling with power applied may result in
electric shock, which may cause death or serious injury to personnel. Defective
installation or maintenance may also lead to the risk of fire.
Carefully read the manual prior to connecting the equipment. Follow all the
installation and maintenance instructions for the equipment throughout its working
life. In particular, follow the installation standards indicated in the Low Voltage
regulations and additional technical instructions.
The installation, operation and maintenance of LV equipment must only be carried
out by authorised installers. See the National Code Instructions specifically
defining the requirements that authorised installers must meet in each country.
If in order to install the equipment, you must work in areas that have high-voltage
(HV) equipment installed, then the personnel handling equipment in this area must
be authorised to work in HV installations. Refer to the National Code Instructions,
in each country, which specifically regulate the requirements for personnel and
maintenance companies autorised to handle high-voltage installations.