COMMELL SPX-602H - Manual (Page 21)

SPX-602H
19
1.7 <Demo program menu expansion>
1.7.1 <General>
1) There are [General], [Camera], [Codec], [Register], [Color], [OSD],
[Motion], [Audio], [Spot], [Network] tap in expansion-menu.
2) You could NTSC and PAL in [General] tap.
2) Default is NTSC, if you want change from NTSC to PAL, choose
[PAL-B] and press [All Reset] button.
3) You could choose Hard disk drive in [Save Drive]. Default is C Drive.
1.7.2 <Camera>
1) [Camera] : You can check the tab-settings through Rec in [Display] of
main screen. User can use this image when the user does Network
transmit.
2) Each channel could set the resolution.
3) All channel is set 720x480 (D1) resolution as a default. (NTSC).