COMMELL SPX-602H - Manual (Page 25)

SPX-602H
23
1.7.6 <OSD >
1) It could be revised the OSD to be seen by PC, TV Monitor.
2) Each camera has been set channel number as a default like channel 1.
3) If it click [Start] in the [Capture] after revising OSD and checking
[EncdeOSD], the revised letter is displayed in the Monitor screen.
4) If you don’t want see OSD, it has only to do disable [EncdeOSD] after
stopping [Capture].
1.7.7 <Motion>
1) It is set the [Motion Capture Enable], [Threshold], [Detect Block Count],
[Rect] In Motion tap.
2) On the occasion of choosing only one channel in [Motion Channel], input
setting value is applied in the just chosen channel.
3) On the occasion of checking [ALL] check box, it could set all channel value
at one time.
4) It is controlled sensitivity of Motion Detect in slide bar of [Threshold] block.
5) It could control block-count to recognize motion by using slide-bar of