CONTA-CLIP EMS-2-Plotter-System - Manual (Page 12)

8. Troubleshooting
If your plotter EMS-2 is not functioning correctly, please check the following:
Device fails to switch on Check whether the mains plug and connecting plug
are plugged in correctly.
Check whether the socket being used is functioning
properly. Is the green light on the power supply
illuminated? If not, please replace the power supply.
Plotter does not respond to
data downloaded from PC Is the interface cable connected properly?
Replace the data cable if necessary.
Is the correct interface on the PC being used?
No labelling is taking place
even though a plotter pen has
been inserted. Check whether the plotter pen has dried out or if
there is sufficient ink in the pen.
Refill or replace the pen if necessary.
Poor labelling quality, uneven
line thickness, missing items The plotter pen tip may be soiled. Clean the tip
carefully using a lint-free cloth dipped inspecial
cleaning fluid.
Replace the plotter pen if necessary.
11