CONTA-CLIP EMS-2-Plotter-System User Manual
Page 13
9. Technical Information
EMS-2
plotter specifications
Type of plotter:
Flatbed plotter
Maximum plotting area:
A3: 440 mm x 305 mm, A4: 220 mm x 305 mm
Plotting speed:
Max. 40 cm/s
Plotter pen:
Special plotter pens with HP fixing
Ports:
Parallel (centronics) / USB Level 1.1
Control language:
Based on HP-GL 7475A
Buffer:
16 MB
Drive:
Two-phase step motor
Pen station:
Max. 4 plotter pens with double seal
Addressable resolution:
.01 mm
Repeat accuracy:
.05 mm
Repeat accuracy after pen change: .05 mm with optimum pen
Power supply:
Via separate power supply with exchangeable
mains power connection
Power supply input voltage:
100-240V AC 50-60Hz
Power supply input current:
.7 A max.
Power supply output voltage:
24 V DC
Power supply output current:
1.25 A max.
Environmental conditions:
In use: 10°C-35°C
35%-75% relative humidity
Storage: -10°C-50°C
10%-90% relative humidity
Safety certificate:
EN 60950-1
Interference safety compliance:
EN 55022 B
EN 61000-4-2 to 6
EN 61000-4-11
Dimensions:
A3: 660 mm (A4: 440 mm) x 440 mm x 125 mm
Weight:
A3: Approx. 8 kg, A4: Approx. 6 kg
12