CUE relayCUE-8 - Manual (Page 17)

Sub UnitByUnitIDIdentify (ByRef Status as String)
This command serves mostly for testing and it is mainly to be used in debugging programs in large
installations where many relayCUE-8 units have been used. It helps to identify the particular unit in
installation and allows to read all its parameters.
Whenever this command is executed, and the unit with UnitID is set according to the equipment
properties, the LINK LED on the front panel will flash and so it can be easily identified in the rack. It
also sends back the "Unit State String" which is written into Status string. For the "Unit State String"
details see Appendix A (Unit State String description). The length of Status string is 90 bytes.
User Manual relayCUE-8
www.cuesystem.com
Page 17 of 24