CUE relayCUE-8 - Manual (Page 9)

relayCUE-8 can also be connected via supplied cable CA0183 and PEbus cable adapter GP0045, see
picture below. Other “Power Express”(PEX) units can also be connected to this bus (see Important
Note below).
For connection of cable CA0183, see Appendix B.
Note:
Max. 31 units (relayCUE-8 or any PEX unit) can be connected to one serial port on ipCUE compatible
with RS-485 standard.
Important Note:
If relayCUE-8 and PEX units are to be combined on the same bus, the PEX units must be
installed and programmed using their serial drivers on serial port like any other serial
controlled equipments (similar way like the relayCUE-8) and not by using “Insert Local Panels
and Interfaces” wizard!
User Manual relayCUE-8
www.cuesystem.com
Page 9 of 24