Dataman S4 - Manual (Page 48)

DATAMAN S4 MANUAL
48 COMP KEY
COMP KEY
COMPARE (START)-( END)=(DEST)
See Glossary for the special ways of editing
the parameter line.
START and END are in RAM, DEST is in the
PROM.
COMPARE matches all data in the PROM with
the contents of the USER-RAM between the
START and END addresses. Locations which
do not match are reported. If the PROM
matches the block exactly, the message SAME
is displayed.
S4 must be configured for the right type of
PROM. A warning message gives the PROM
type. If the ESCape key is pressed, whilst
editing the parameters, or after any reported
mismatch the process is aborted. To start the
COMPARE, or restart after a reported
mismatch, press the ENTER key. A mismatch
between PROM and USER-RAM is displayed