Dataman S4 - Manual (Page 91)

DATAMAN S4 MANUAL
Tektronix Format 91
2-5 Four HEX characters show
two byte Start Address, most
significant byte first.
6-7 "00" Byte count.
9-10 Two HEX characters show
checksum of all previous HEX
characters, not including "/",
11-12 Carriage Return & Line Feed.
Tek Extended Data Record.
Position Character
1 "%" Percentage character
2-3 Two HEX characters
expressing character count in
record, not including "%"
4 "6" for data record
5-6 Checksum of all HEX
characters not including "%".
7-N Between 2 and 17 characters.
The first HEX character
specifies how many HEX
characters follow showing
Load Address, most significant
byte first.
N-M Data bytes, each byte is two
HEX characters.
M+1,2 Carriage Return & Line Feed.
Tek Extended End of File Record.
Position Character
1 "%" Percentage character
2-3 Two HEX characters
expressing character count in
record, not including "%".
4 "8" for EOF record