Dataman S4 - Manual (Page 86)

DATAMAN S4 MANUAL
86 Intel Format
Must be added to USBA to
form 20 bit address.
8-9 "01" Data Record
10-N Data bytes in hexadecimal.
Each byte is two HEX
characters
N+1,2 Checksum complement of all
bytes except colon, linefeed
and return. This makes the line
add up to zero.
N+3,4 Carriage return and line feed
End of File Record.
Position Remarks
1 ":" ASCII Colon delimiter
2-3 "00" Number of Bytes.
4-7 2 byte Transfer Address
usually "0000"
8-9 "01" Record Type
10-11 Checksum complement of all
bytes except colon, linefeed
and return usually "FF" This
makes the line add up to zero.
12-13 Carriage return and line feed