Dataman S4 - Manual (Page 76)

DATAMAN S4 MANUAL
76 FUNC RCVE = Receive Library
FUNC RCVE = Receive Library
Receives a new library ROM into the TPA area.
This command is useful if you download a new
library from our Bulletin Board to your
computer. When you have sent the file to S4
you can make a new LIBRARY ROM with
MAKELIB.
Your SETUP must be INTEL format for this
command to work.
When receiving a Library file in this manner,
code from F800-FFFF must be stripped out
from the Intel Hex file. Otherwise S4 will crash
when it receives the file. Intel Hex files can
easily be edited using an ASCII text editor.
After reception of a correct library file, S4 must
be RESET, and then Library should be started,
by pressing ENTER at the START LIBRARY?
Prompt.