Datamax S-Class ST-3210 - Manual (Page 13)

ST/SV-3210 and ST/SV-3306 3
1.0.2 Optional Features
This printer offers these optional features.
Cutter and Tray (ST Models only):
Ø A factory-installed device that will cut stock with a maximum
thickness of .008 inch (.2 mm) and a minimum thickness of .0025
inch (.06 mm). The tray attaches to the front of the printer to collect
cut tickets, and is capable of stacking a minimum of 100, 3.5-inch
(88.9 mm) wide tickets, ranging in lengths from 2.0 inches (50.8
mm) to 5.63 inches (142.9 mm).
Flash Memory Modules:
Ø Removable, permanent storage devices for use with graphics, fonts,
and ticket formats, available in different sizes. Order according to
module size needed:
Part Number
Memory Module Size ST Printer SV Printer*
256 Kbytes 78-2166-01 DPO78-2443-01
512 Kbytes 78-2166-02 DPO78-2443-02
1 Mbytes 78-2166-03 DPO78-2443-03
2 Mbytes 78-2166-04 DPO78-2443-04
*A Qualified Installer is required for the installation of this option.
Roll Hanger (ST Models only):
Ø An interior mounting option allowing the printer to use 7-inch outer
diameter (177.8 mm) rolled stock wound on 2-inch (50.8 mm)
diameter cores. Order part number 12-2978-01.
External Keyboard Support:
Ø Connection for the DMX Passport™ external keyboard system. Order
part number 61-2159-xx
LAN Interface:
Ø An interface that connects the printer to most LAN networks. Order
part number 78-2278-01.