Specifications, 0 specifications – Datamax S-Class ST-3210 User Manual
Page 53
ST/SV-3210 and ST/SV-3306
43
Specifications
6.0 Specifications
Communications
Character Set:
ANSI ASCII
Parallel Interface Port:
Centronics
type 36-pin
Serial Interface Port:
RS-232c and RS-422; DB25
Baud Rates:
600, 1200, 2400, 4800, 9600, 19.2K and 38.4K
Word Length and Parity:
Selectable data format:
7-bit word with even parity, or
8-bit word with no parity
Handshaking:
Xon/Xoff and CTS & DTR.
Input Buffer:
Serial: Approximately 6 Kbytes. XOFF is
transmitted and DTR goes low with 750 bytes
available in the buffer. XON is transmitted and
DTR goes high when 1000 bytes remain in the
buffer. Characters are transmitted without
parity from the printer.
Parallel: 1KBytes.
Control (Front) Panel
Indicators:
Power, Fault and On-Line.
Buttons:
Dual Purpose: Pause/F1; Feed/F2; and Test/F3
Potentiometer:
0-20 darkness settings
Electrical
Input Voltage,
Configurable:
105
−
125 VAC, or
210
−
250 VAC; 47-63 Hz.
Circuit Protection:
115 VAC: 1.6A Time Delay Fuse.
230 VAC: 0.8A Time Delay Fuse.
Grounding:
Unit must be connected to a properly grounded
receptacle.