Datamax S-Class ST-3210 - Manual (Page 46)

36 ST/SV-3210 and ST/SV-3306
4.4.5 Interior Cleaning
ST Models only: Ticket Compartment Cleaning
During normal operation, paper particles from the ticket stock
accumulate inside the printer. These particles can stick to the ticket and
cause voids in the print, reducing print quality. To clean the interior of
the printer:
Œ Turn ‘Off’ and
unplug the printer.
• Raise the access
cover; see Section
3.2.
Ž Slide the printhead
latch to the
unlocked position,
raise the Printhead Assembly (see Section 4.4.1) and remove the
ticket stock.
• Using a soft brush or compressed air, remove all debris accumulated
inside the ticket compartment.
• Plug in and turn ‘On’ the printer.
‘ Load ticket stock (see Section 3.2).
’ Close the access cover.
4.4.6 Exterior Surface Cleaning
The exterior surface can be cleaned using a general purpose cleaner and a
soft cloth or sponge. Never use abrasive cleansers or solvents. To clean:
Œ Turn ‘Off’ and unplug the printer.
• Gently wipe the exterior surfaces until clean and then allow time to
dry.
Ž Plug in and turn ‘On’ the printer.