Monroe Electronics R199 - Manual (Page 17)

17
Programming the R199 is straight forward. There are two types of events:
A weekly event, that will repeat each week at the same time and day.
And dated event, which will occur at a stated month, date and time.
You may enter up to 200 weekly events for each of the four switches, and up to 25 dated
events for each of the four switches.
This is the Programming page with no events entered.
The user is also able to export his data for the relay he is programming, and then if he has any
problems, he may import this data later. Please note, that importing the programming data
that was previously saved, adds it to the data already present in the timer. If it is desired to
replace the present data with the saved data, it is necessary to erase both the weekly and the
dated events first.