One Systems POPS 15a - Manual (Page 18)

POPS15a may be mounted to any high-quality loudspeaker stand with a
standard 1.375 inch (35 mm) diameter mounting pole. The mounting pole MUST
be located on a level surface that is capable of safely supporting the weight of
both the loudspeaker stand and the POPS15a. It is necessary to verify safe
operation with the loudspeaker stand supplier/manufacturer.
DO NOT ADD OR SUSPEND ANY ITEMS TO THE POPS15a OR
LOUDSPEAKER’S STAND
WARNING
DO NOT ATTEMPT TO SUSPEND ONE SYSTEMS PRODUCTS WITHOUT
UNDERSTANDING LOCAL AND NATIONAL CODES THAT APPLY TO
OVERHEAD SUSPENSION OF PRODUCTS.
DO NOT ATTEMPT TO SUSPEND ONE SYSTEMS PRODUCTS UNLESS YOU
ARE A PROFESSIONAL WITH KNOWLEDGE OF LOCAL AND NATIONAL
CODES RELATED TO SAFE SUSPENSION AND ARE EXPERIENCED IN
SUSPENDING PRODUCTS OVERHEAD.
ONE SYSTEMS IS NOT RESPONSIBLE FOR FAILURES RELATED TO NON-
COMPLIANCE WITH LOCAL AND NATIONAL CODES AND SAFE
SUSPENSION PRACTICE.
DO NOT ATTEMPT TO SUSPEND THIS PRODUCT WITHOUT READING AND
UNDERSTANDING THE DOCUMENT “ Rigging and Suspension of ONE
SYSTEMS Products”. THIS DOCUMENT MAY BE FOUND AT:
www.onesystems.com . In the “Education” section of the One Systems website.
ALL ASSOCIATED RIGGING IS THE RESPONSIBILITY OF OTHERS.
USING POPS15a (Application and Trouble-Shooting Tips)
POPS15a is a high-quality professional sound reinforcement system designed for
use in both direct weather outdoor applications as well as high ambient noise
indoor applications. Some basic precautions will insure long-term reliability.