One Systems POPS 15a User Manual
Page 4
Read all of the instructions included in this manual
NOTE: The AC mains supply end of the POPS15a power cable MUST be
plugged into a supply source that has a GROUND FAULT CIRCUIT
INTERRUPTER (GFCI). The 115 V version is supplied with an in-line GFCI. The
230 Vac version is supplied with a Portable Residual Current Device (PRCD). In
Europe, these devices are also referred to as Residual Current Devices or
Residual Current Circuit Breakers.
NOTE: THE RESET ON THIS DEVICE SHOULD BE TESTED TO VERIFY
PROPER OPERATION OF THE SAFETY DEVICE!
POPS15a is supplied with an “in line” GFCI device for use in countries that use
115VAC. DO NOT bypass this device or disable. The end of the AC Mains cable
that is plugged in to the AC Mains supply must be in a dry condition.