One Systems POPS 15a - Manual (Page 7)

Some states and jurisdictions do not allow the limitation or exclusion of
incidental or consequential damages, or limitation on the length of an
implied warranty, so the above limitations or exclusions my not apply. This
warranty provides specific legal rights, and other rights may exist from
state to state or from one jurisdiction to another
REGULATORY AND SAFETY DATA
This product was tested to International Standards for safe operation. POPS15a
is compliant with EN60065. Test certification may be obtained from One
Systems.
CONTENTS
POPS15a system contains three cartons. The contents of the cartons are as
follows:
POPS15a ENCLOSURE
One Portable Outdoor Powered System 15a (POPS15a) that includes a Bi-
Amplified class D digital power amplifier system with on-board Digital Signal
Processing (DSP).
AC MAINS CABLE REEL
100 ft. (30.5 m) of SJOW-rated AC mains cable with an IP 68-rated cable end
connector designed to mate to the connector on POPS15a’s enclosure. The
cable is supplied on a portable cable reel. This cable assembly consists of a
moisture-resistant connector designed to be plugged into POPS15a.
The other end of this cable assembly consists of either a GFCI (Ground Fault
Circuit Interrupter) and the appropriate mating plug for 115 V AC Mains voltage
or a Portable Residual Current Device (PRCD) for 230 V AC Mains voltage.
NOTE: THIS CABLE END MUST BE IN A DRY LOCATION!
POPS15a cable end AC Mains End (MUST BE USED IN
Showing GFCI device DRY LOCATION)